• VEITH SYSTEM has an unique Know-How of more than 800 installations world wide.
• VEITH SYSTEM has developed certain strategies for generating special check- and stripe-type markers.
• A VEITH SYSTEM marker reduces the problems of variations in the repeat.
• A VEITH SYSTEM marker for classic men’s (suits, jackets,trousers) allows to use different repeats in the same lay package.
• With a VEITH SYSTEM marker it is possible to cut checks and stripes with a CNC-Cutter.
• VEITH SYSTEM offers training on site or in our studio.
• For shirts and ladies wear application we offer in addition the VEITH PinIT software
• Savings in labor time between 30% and 50% Depending on the product, a material savings are between 3% and 7%.  This results in an average pay-back time of less than one year.
• The pay-back time of a CNC-cutter is reduced,because now it is possible to use it for checks and
  stripes as well.

PROBLEM :

• Matching of checked and striped material has always been difficult and time consuming.
• Traditional methods tend to waste a lot of material, since the patterns are cut out with a blocking tolerance.
• The task of rearranging the blocked out patterns is tedious and expensive.
• The workers involved in this process have to be skilled.

SOLUTION:

• The patented VEITH SYSTEM PIN-TABLE consists of a slotted aluminum top and Needle-Bars underneath.
• Each Needle-Bar has pins positioned inside the slots of the table top.
• The Needle-Bars can be moved freely along the length of the table.
• The height of the pins can be adjuted with the turn of a hand-wheel.
• Each pin can be individually locked down.
• Each pin has a rounded top.
• The PIN-TABLE is an abstract copy of the marker.

ADVANTAGES:

• Improve your quality.
• Spread and match in one step.
• Reduce your relaying operations.
• Have lower fabric consumption.
• Do the fine cutting after spreading without relaying.
• Prepare your lay for CNC-Cutting.

PIN-TABLE TECHNICAL SPEC :

• Standard table size 170cm x 404 cm
• Extra widths 184, 198, 212, 226 and 240 cm available.
• Length is adjustable with 2m modules.
• Needle diameter is colour coded (1.0, 1.4, 1.8 mm).
• Height of needle up to 10cm.
• Extra fine needle with 0.6mm available.

OPTIONAL EQUIPMENT:
VEITH SYSTEM NEEDLE-PLATES

• Pneumatic Cutting-Device
• Rollstand or Turn-Table with extra device for underlay
• paper and polyethylene film
• Air-Floatation (2) for easy transport of heavy lays
• Additional Needle-Bars
• One-Side parallel adjustment of Needle-Bar
• Belt-Drive for automated transport

SOLUTIONS FOR SPECIAL APPLICATIONS:          

• PIN-TABLE for flat knitted material
• PIN-TABLE for tubular knitted material
• SYMMETRIC MATCHING SYSTEM
• LINEAR MATCHING SYSTEM