Aerospace, Wind & Composites

" A high-speed, static single-ply cutting system engineered for accuracy "

Buy Now

Download Brochure

IIGM

Purchase Protection Plan

GERBERcutter DCS 2500

The GERBERcutter® DCS 2500 computer controlled cutting system is a high-speed, single- or low-ply static table cutter, designed to cut a wide variety of materials.

Features

The GERBERcutter DCS2500 can really cut it. This computer-controlled system is available in various width and length configurations.

Get to work right away. Because the GERBERcutter DCS 2500 is highly intuitive, the transition from manual cutting is easy. Make every cut count. The DCS 2500 uses a powerful vacuum system to hold material firmly in place during cutting to ensure quality cut parts. Do it all with one system. The cutting head is designed to accommodate three tools simultaneously to minimize tool changes. Choose from straight knives, wheel knives, notching tools and punches. Also includes a pen for annotation.

Technical Specification:

Characteristics
Fabric Height		Single Ply
Cutting Speed (max)		1,1 m/sec	45 in/sec
Head Acceleration (max)		0,5G	200 in/sec2
		3,7 - 7,3 - 9,1 - 11 - 12,8 -
		14,6 - 16,5 - 18,3 - 20,1 -	9.2, 21.2, 27.2, 33.2, 39.2,
Machine Dimensions	Lengths	21,9 - 23,8 - 25,6 - 27,4 -	45.2, 51.2, 57.2, 63.2, 69.2,
		29,3 - 31,1 - 32,9 - 34,7 -	75.2, 81.2, 87.2, 93.2, 99.2,
		36,6 m	105.2, 111.2, 117.2 ft
	Widths	0,88 - 1,8 - 2,41 - 3,02 - 3,63 - 4,24 m	34.77, 70.77, 94.77, 118.77, 142.77, 166.77 in
Table heights		0,8 or 0,9 m	31.5 or 36 in

Electrical Requirements
Control and Drive System	110V@20 amps, 200V-240V@10 amps, single phase 50/60Hz (4wire)
Table Vacuum	220-440V, 3-phase, 60 Hz, 10-32 amps 220/380/440V, 3-phase 50 Hz, 80 amps
Compressed Air	14 liters/min @ 5,5-8,3 bar	0.5 SCFM @ 80-120 PSI
Operating Environment
Temperature (maximum)	43ºC	110ºF
Humidity (maximum)	95% (non-condensing)
Vacuum System	760 m above sea level	2,500 ft. above sea level